
EvoHeat
- Quiet: about as loud as a fridge at one metre in silent mode.
- Efficient: up to 22 units of heat for every unit of power, at peak.
- Warranty: 25 years on the titanium heat exchanger.

Brisbane · Sunshine Coast · Gold Coast
EvoHeat, Madimack and Pentair inverter heat pumps, sized from three photos, then supplied, plumbed and installed by Jacob.
7am–7pm, 7 days · Jacob answers the phone · Written quote, no obligation
Who you deal with
I supply and install heat pumps across Brisbane, the Sunshine Coast and the Gold Coast. Send me three photos and your pool size, and I'll tell you which unit fits and what it takes to put in. Then I deliver it, install it myself and do all the plumbing into your filter line. The one thing I don't do is electrical: a 10 A unit just plugs in, and if yours needs an electrician to run power, they do that after the install and I come back free of charge to commission it. If a heat pump isn't right for your pool, I'll tell you.
How it works
Length, width, depth, or run the calculator. That's enough for a first answer.
The pool, the pump and filter, the nearest power point. Text them or use the form.
I confirm the model and size and send one written quote for the unit, the plumbing and the install. No obligation.
Delivered, positioned, plumbed into your filter line and commissioned, and I show you the controller. If it needs an electrician to run power, I come back free to commission it.
Which heat pump
I supply EvoHeat, Madimack and Pentair because they publish real performance figures and back their heat pumps with long warranties.



Two inverter series from Pentair Australia. Jacob picks the model and size for your pool.


You never have to read a spec table. Send three photos and I'll tell you which one, which size, and why.
Sizing
Area we cover
I cover Brisbane, the Sunshine Coast and the Gold Coast.
Not sure if we cover you? Give us a call.
FAQ
Both. I supply and install it myself, start to finish: delivered, positioned, plumbed into your filter line and commissioned. If you already have an installer, supply-only is fine too.
Delivery, positioning, all the plumbing into your filter line, setup and a walkthrough of the controller. If your unit needs an electrician to run power, they do that after the install and I come back to commission it. That return visit is free of charge.
It depends on the unit. Smaller 10 A units are plug-and-play from a normal outdoor power point. A 15 A unit needs a 15 A outlet, installed by a licensed electrician. Larger single-phase and three-phase units are hard-wired by a licensed electrician. I don't do any electrical work myself: I install and plumb the unit, your electrician runs the power, and I come back free of charge to commission it once it's connected.
The first heat-up from cold takes a day or two of running. For an 8 × 4 m pool the calculator estimates about 30 hours to lift it 6°C. After that the heat pump just tops it up, and a cover at night makes the biggest difference.
Yes. Brisbane's July air averages about 16°C, and inverter heat pumps keep heating at that temperature. They make less heat as the air cools, so I size for the coldest month you want to swim in.
Usually the same day. Send three photos and your pool size, and I reply with a size and a written quote. No obligation.
I cover Brisbane, the Sunshine Coast and the Gold Coast. Not sure if we cover you? Give us a call.
Your pool, the pump and filter, and the nearest power point. Jacob replies the same day with a size and a written quote.